Author Topic: YJ Unlimited  (Read 17610 times)

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #62 on: August 10, 2015, 09:56:16 PM »
I installed one of the mastercraft seats I got from Hendrix in the YJ today.  I think I like them!  Have to get it back down to its normal height with an engine back in it to really know how they are to get in and out of.




1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #61 on: August 10, 2015, 09:50:22 PM »
This was the cleanest of all the carpets.  I forgot to take photos of the front floors.  Used a tank and a half of fuel in my pressure washer cleaning them!



This was after cleaning.

1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #60 on: August 10, 2015, 09:49:33 PM »
Started tearing down the beast.  Sadly I had an engine failure in the trusty old 4.0. I don't have time to diagnose and rebuild right now as the catskills jamboree is coming right up.  Found a donor 4.0 do I'm yanking this motor out and dropping another one in its place.




1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #59 on: August 10, 2015, 09:47:34 PM »
I realized I never posted this photo.  The water was a little deeper than I thought!  Will that and I chose a bad line.

1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #58 on: July 18, 2015, 07:19:11 PM »
I didn't really have the money to spend but found a great deal on some Mastercraft Rubicon seats with adjustable lumbar.  I couldn't pass them up.  I'm going to try them in the willys but think they will end up in this jeep.



1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Doc

  • 2002 Jeep TJ
  • Administrator, Webmaster, Treasurer
  • Club Founder
  • **
  • Posts: 9940
  • Total likes: 263
  • Karma: 144
  • It's a Jeep thing... And it's WICKED expensive!
  • Model and Year: 99 Cherokee XJ Clasic, 99 Cherokee Sport, 99 TJ X, 02 TJ X, CJ7 and now another 2002 TJ X
Re: YJ Unlimited
« Reply #57 on: April 30, 2015, 10:17:56 AM »
that is sweet!!
Enjoy the trails ... Tread Lightly, Respect the Landowner ... and Get Permission!

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #56 on: April 30, 2015, 10:15:45 AM »
Installed my Poison Spyder hood louver.

removed the hood



taped down the template and center punched the holes



drilled pilot holes



used the hole saw and cut the holes.  then taped out for the cuts.  I forgot to take a picture of the metal cut out



hood back on and showing underside



top side

1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #55 on: April 30, 2015, 10:15:08 AM »
I installed my Master Pull Synthetic winch rope. 

1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #54 on: April 27, 2015, 09:17:31 PM »
Replaced the ball joints and wheel bearing in the rf today.  I also installed the hawse fairlead.  I figured while I was at it I would install the 12" rough country light bar.






1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #53 on: April 24, 2015, 10:46:59 PM »
I got my fairlead today!  The rope should be here next week along with my poison spyder hood louver!
1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Grimm

  • Self taught Trained Professional
  • 2019 Supporting Members
  • *
  • Posts: 2185
  • Total likes: 117
  • Karma: 32
  • Too. Many. Projects.
  • Model and Year: Wouldn't you like to know
Re: YJ Unlimited
« Reply #52 on: April 23, 2015, 11:07:22 PM »
You can leave that rope and hook on the porch, I'll be over to pick it up in the morning :)


Wooly

And that's why I have stuff sent to my work! Lol
One good thing abut having my son still at home, he brings my stuff inside as soon as it is dropped off or can sign for stuff if need be
What could POSSIBLY go wrong?

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #51 on: April 23, 2015, 09:28:55 PM »
I have had some strange noises in my front end.  I did some investigating and found a bad wheel bearing in the front end.  I just replaced this bearing last year...booooo!

I tore it apart tonight so I could exchange the bearing tomorrow.  I found the ball joints in the right front are smoked. 

This will be the first time I have ever had to replace ball joints in a jeep!
1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #50 on: April 23, 2015, 09:25:09 PM »
You can leave that rope and hook on the porch, I'll be over to pick it up in the morning :)


Wooly

And that's why I have stuff sent to my work! Lol
1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline woolyworm

  • Cheat J 101...Build a Jeep
  • Non Supporting Member
  • Posts: 3163
  • Total likes: 622
  • Karma: 22
  • 75 CJ7
Re: YJ Unlimited
« Reply #49 on: April 20, 2015, 09:06:43 PM »
You can leave that rope and hook on the porch, I'll be over to pick it up in the morning :)


Wooly
75CJ7, 72 AMC 304, T18, 45:1 crawl, chromo axles, warn hubs, 3" Black Diamond, 1/4" belly skid, front locker, other goodies, sweat ...

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #48 on: April 20, 2015, 08:58:42 PM »
I ordered some goodies tonight.  I bought MasterPull Amsteel Blue Dyneema SK-75 synthetic winch rope with their combi sling hook.


I also used the club discount at 4wd.com and bought a Poison Spyder Hood louver powder coated black and an aluminum hawse fairlead.
« Last Edit: April 20, 2015, 09:05:08 PM by Corey »
1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #47 on: April 19, 2015, 08:40:49 PM »

Thanks man!

I'm really impressed by how bright this thing is.

Here is the obligatory front on night shot.




This is my stock headlights on high beam.



This is the light bar. 

1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline woolyworm

  • Cheat J 101...Build a Jeep
  • Non Supporting Member
  • Posts: 3163
  • Total likes: 622
  • Karma: 22
  • 75 CJ7
Re: YJ Unlimited
« Reply #46 on: April 19, 2015, 06:26:00 PM »
Nice Corey - that's sharp


Wooly
75CJ7, 72 AMC 304, T18, 45:1 crawl, chromo axles, warn hubs, 3" Black Diamond, 1/4" belly skid, front locker, other goodies, sweat ...

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #45 on: April 19, 2015, 03:14:00 PM »
Got the light bar all mounted and wired up!


1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline beerman

  • Non Supporting Member
  • Posts: 444
  • Total likes: 34
  • Karma: 8
  • Model and Year: 2010 rubicon
Re: YJ Unlimited
« Reply #44 on: April 19, 2015, 07:28:46 AM »
Looks good

Offline woolyworm

  • Cheat J 101...Build a Jeep
  • Non Supporting Member
  • Posts: 3163
  • Total likes: 622
  • Karma: 22
  • 75 CJ7
Re: YJ Unlimited
« Reply #43 on: April 18, 2015, 08:07:39 AM »
Looks great Corey.  I PLAN ON SOMEKTHING SIMILAR - NOT FOR A LIGHT BAR BUT TO PROTECT MY WINDSHEILD - IF I CAN GET MY 40 YR OLD WINDSHEILD BOLTS OUT!
75CJ7, 72 AMC 304, T18, 45:1 crawl, chromo axles, warn hubs, 3" Black Diamond, 1/4" belly skid, front locker, other goodies, sweat ...

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #42 on: April 17, 2015, 11:36:51 PM »
I started building some brackets to mount my new 50" LED light bar tonight.

Started with some cardboard templates.

Used my plasma cutter and drill to make steel versions of the templates.


Tack welded together.  Self adhesive plastic is just too minimize weld splatter damage


Fully welded


Added the vertical section.


Front view, have some more work to do to achieve the look I want.  Hopefully get the other side done tomorrow or Sunday so I can start working on the mounting tabs for the light.



1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #41 on: March 01, 2015, 04:58:12 PM »
Picked up a small single row cree led bar to go on the front bumper.
1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #40 on: January 20, 2015, 07:41:52 PM »
Got my package of goodies from RuffStuff Specialties for winning second place in the YJ of the year contest!

1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline TJKDave

  • 2019 Supporting Members
  • *
  • Posts: 3830
  • Total likes: 480
  • Karma: 38
  • Crawl Ratio: TJ 47.50:1 JK 58.9:1
  • Model and Year: 1999 TJ, 2012 JK TreadLightly Supporter
Re: YJ Unlimited
« Reply #39 on: January 11, 2015, 07:37:46 PM »
Nice :)
99% of your JK questions answered here thanks to  JLC08JK on JeepForum for this information:

http://www.jeepforum.com/forum/f96/jeep-jk-frequently-asked-questions-will-rub-links-popular-threads-1074059/

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #38 on: January 11, 2015, 05:49:53 PM »
Won second place in the jeep forum YJ of the year contest!  Have a nice little prize pack coming!

http://www.jeepforum.com/forum/f12/yj-year-2014-vote-now-big-one-2923569/
1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #37 on: December 15, 2014, 07:33:27 PM »
Got a smoking good deal on a pair of seats today. Going to see if I can make them work in the jeep.  They are 2004 Subaru WRX bucket seats.  They need a good cleaning.  I'm going to drop them of at my buddies detail shop to be cleaned
1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline larrysjk

  • 2019 Supporting Members
  • *
  • Posts: 274
  • Total likes: 117
  • Karma: 7
  • 87.06:1 crawl ratio
  • Model and Year: 07 jk rubicon
Re: YJ Unlimited
« Reply #36 on: September 25, 2014, 07:45:11 PM »
That's some nice stuff, Corey. I want one!
the best things in life aren't things....

Offline rockman

  • 2019 Supporting Members
  • *
  • Posts: 632
  • Total likes: 283
  • Karma: 15
  • Model and Year: 97 TJ and 03 Rubicon
Re: YJ Unlimited
« Reply #35 on: September 25, 2014, 07:38:36 PM »
Nice work Corey.

Offline Friggen Dawn

  • I am not your average girl......I am a Jeep girl!
  • 2019 Supporting Members
  • *
  • Posts: 814
  • Total likes: 110
  • Karma: 78
    • Photos
  • Model and Year: LJ, TJ, XJ, YJ
Re: YJ Unlimited
« Reply #34 on: September 25, 2014, 04:19:13 PM »
Love the roll cage.  :-*  I have been wanting to do a front roll cage around the dash and windshield of the YJ and LJ.
Don't outsmart your common sense.

Offline TJKDave

  • 2019 Supporting Members
  • *
  • Posts: 3830
  • Total likes: 480
  • Karma: 38
  • Crawl Ratio: TJ 47.50:1 JK 58.9:1
  • Model and Year: 1999 TJ, 2012 JK TreadLightly Supporter
Re: YJ Unlimited
« Reply #33 on: September 24, 2014, 09:05:29 PM »
Nice job Corey.  That looks great!   8)
99% of your JK questions answered here thanks to  JLC08JK on JeepForum for this information:

http://www.jeepforum.com/forum/f96/jeep-jk-frequently-asked-questions-will-rub-links-popular-threads-1074059/

Offline The Professor & MaryAnn

  • 2019 Supporting Members
  • *
  • Posts: 819
  • Total likes: 137
  • Karma: 30
  • Model and Year: 1994 Jeep Wrangler YJ
Re: YJ Unlimited
« Reply #32 on: September 24, 2014, 11:11:09 AM »
Looks nice! You must work on that 20 hours a day!

Offline 06Rubi

Re: YJ Unlimited
« Reply #31 on: September 24, 2014, 07:14:34 AM »
Sweet!  Nice work.
01 XJ, 33" TSL's, custom bumpers, XRC8, Lockrite/Aussie, MonkeyBars sliders, 5100's, etc

Offline woolyworm

  • Cheat J 101...Build a Jeep
  • Non Supporting Member
  • Posts: 3163
  • Total likes: 622
  • Karma: 22
  • 75 CJ7
Re: YJ Unlimited
« Reply #30 on: September 23, 2014, 10:28:16 PM »
Nice!


Wooly
75CJ7, 72 AMC 304, T18, 45:1 crawl, chromo axles, warn hubs, 3" Black Diamond, 1/4" belly skid, front locker, other goodies, sweat ...

Offline Grumpy

  • 2019 Supporting Members
  • *
  • Posts: 498
  • Total likes: 88
  • Karma: 2
    • Facebook
  • Model and Year: Wrangler 2004
Re: YJ Unlimited
« Reply #29 on: September 23, 2014, 09:58:52 PM »
Sweet!! Great work Corey.
It ain't Easy being Easy!

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #28 on: September 23, 2014, 09:53:34 PM »
I'm terrible at keeping this updated.  I just finished building a roll cage for my jeep.  Here are some photos.




1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline woolyworm

  • Cheat J 101...Build a Jeep
  • Non Supporting Member
  • Posts: 3163
  • Total likes: 622
  • Karma: 22
  • 75 CJ7
Re: YJ Unlimited
« Reply #27 on: October 02, 2013, 01:21:56 PM »
very cool
75CJ7, 72 AMC 304, T18, 45:1 crawl, chromo axles, warn hubs, 3" Black Diamond, 1/4" belly skid, front locker, other goodies, sweat ...

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #26 on: October 02, 2013, 10:42:39 AM »
How heavy is the vise set-up?

I would guess about the same weight as a pintle hitch
1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline MtnClimber

  • Associated Clubs
  • *
  • Posts: 816
  • Total likes: 46
  • Karma: 15
  • Ready to Explore!
  • Model and Year: 01 Tacoma DC
Re: YJ Unlimited
« Reply #25 on: October 01, 2013, 09:23:58 PM »
How heavy is the vise set-up?
www.northeastoverland.org
"Arguing with a fool proves there are two" ~ Doris M. Smith
SUPPORT YOUR LOCAL FIRE DEPARTMENT

Offline Grimm

  • Self taught Trained Professional
  • 2019 Supporting Members
  • *
  • Posts: 2185
  • Total likes: 117
  • Karma: 32
  • Too. Many. Projects.
  • Model and Year: Wouldn't you like to know
Re: YJ Unlimited
« Reply #24 on: October 01, 2013, 06:51:28 PM »
Nice

Sent from my USCC-C6721 using Tapatalk 2

What could POSSIBLY go wrong?

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #23 on: October 01, 2013, 09:39:40 AM »
Built a receiver mount for a small vice for trail repairs



1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #22 on: September 28, 2013, 09:24:30 PM »
looks sweet !! now make a skid plate for your gas tank  8)

You know I have never really had the need for anything stronger than the stock one.  I might build one someday I'd this one starts getting beat up
1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Cain

  • Supporting member
  • *
  • Posts: 1175
  • Total likes: 303
  • Karma: 15
  • If you can't be a good influence, Be a good warnin
  • Model and Year: 2000 tj sport 4.0 5spd, 4" BDS, D30/44 4.56's, 35" Mickey MTZ's
Re: YJ Unlimited
« Reply #21 on: September 28, 2013, 07:20:04 PM »
looks sweet !! now make a skid plate for your gas tank  8)

Offline Motor Man (Bill)

  • Non Supporting Members
  • Posts: 2794
  • Total likes: 16
  • Karma: 32
  • RTI Ramp Front 1382.98
  • Model and Year: 2003 TJ with a couple mod's / 2000 2 door XJ
Re: YJ Unlimited
« Reply #20 on: September 28, 2013, 06:50:05 PM »
Looks nice :yes:
Owner of Olamon off road park

Pass at own risk!

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #19 on: September 28, 2013, 06:13:05 PM »
All done and installed!

1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #18 on: September 28, 2013, 10:15:50 AM »
That looks really good

Sent from my USCC-C6721 using Tapatalk 2

Thanks!
1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Grimm

  • Self taught Trained Professional
  • 2019 Supporting Members
  • *
  • Posts: 2185
  • Total likes: 117
  • Karma: 32
  • Too. Many. Projects.
  • Model and Year: Wouldn't you like to know
Re: YJ Unlimited
« Reply #17 on: September 28, 2013, 09:07:09 AM »
That looks really good

Sent from my USCC-C6721 using Tapatalk 2

What could POSSIBLY go wrong?

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #16 on: September 27, 2013, 10:42:24 PM »







1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #15 on: September 24, 2013, 08:48:42 AM »
Thanks!  I think I am going to weld some 1/4" to each side of the tabs to beef them up some.
1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins

Offline MtnClimber

  • Associated Clubs
  • *
  • Posts: 816
  • Total likes: 46
  • Karma: 15
  • Ready to Explore!
  • Model and Year: 01 Tacoma DC
Re: YJ Unlimited
« Reply #14 on: September 24, 2013, 07:47:31 AM »
Got some pretty nice angles going on there 8)
www.northeastoverland.org
"Arguing with a fool proves there are two" ~ Doris M. Smith
SUPPORT YOUR LOCAL FIRE DEPARTMENT

Offline Corey

  • Seven Slot Fabrication
  • Non Supporting Members
  • Posts: 631
  • Total likes: 176
  • Karma: 5
  • Build-Break-Repeat
  • Model and Year: 1993 Jeep Wrangler "Unlimited", 1952 Willys CJ-3a, 1997 TJ Sport
Re: YJ Unlimited
« Reply #13 on: September 23, 2013, 09:20:25 PM »
After the locker install I started building my rear bumper.

I started with a piece of 3"x4" rectangle tubing.  Will have a 2" receiver and 2 d ring tabs.

I only finished about half tonight.  I think it will look and work great when done!









1952 Willys cj3a "resto-mod" project
1993 Wrangler YJ "Unlimited"  with a few mods
1997 Wrangler TJ, 4" lift and plenty of rust
1998.5 Dodge 2500 Cummins